Back

2021 LiuGong Medium Wheel Loaders 848H

To ensure real return on investment you demand machines that can quickly adapt to any situation on the jobsite and handle multiple jobs with speed and precision.
MoreLess
Limited Time Offer!

Selling Price -
Click for a Quote
No Images Available

Selling Price -

Click for a Quote

HD Certified Pre-Owned

2021 LiuGong Medium Wheel Loaders 848H

JOBSITE ADAPTABILITY

To ensure real return on investment you demand machines that can quickly adapt to any situation on the jobsite and handle multiple jobs with speed and precision. Our new 848H wheel loaders, combined with our perfectly matched quick coupler and attachments, create the ultimate in multi-tools.

The new LiuGong 848H integrates the strongest technologies, including a powershift transmission and advanced load sensing hydraulic system, allowing you to be far more productive.

Features may include:

Integrated Cummins Engines
  • The new 848H comes equipped with a fuel efficient world-class Cummins QSB6.7 Tier 4 Final engine that maximizes torque output and delivers more power at lower engine speeds while also optimized for fast throttle response. The integrated exhaust system provides maximum fuel efficiency over the working cycles. Optimized NOx Dual Reduction Technology (EGR+SCR) achieves the Tier 4F/Stage IV emissions regulations with the unique combination of high performance and low fuel consumption.
Operators First
  • The 848H Cab design maximizes the space available in the cabin for the operator. The vertically and horizontally adjustable air suspension seat provides the operator benefits of maximum comfort and less fatigue. Thanks to the optimized design of the front glass, the new electric system, high quality sealing and the efficient cooling compartment, the sound level inside the cabin is minimized to: 73dB (A).
Rock Solid
  • Our optimized Z-bar geometry positions the bucket closer to the tires, achieving high bucket breakout forces with maximum rollback. Stable transport of materials with minimal spillage is easily achieved.
Serviceability
  • The engine hood is made of a new, lightweight polymer material that allows manual raising and lowering of the hood with ease and minimal effort. The cab filter is located on the right side of the cab exterior for ease of serviceability. Replacement of the primary filter is easy, and the steel frame secures it in place. The engine air filter is also easy to replace which adds to service efficiency.
  • 2021
  • LiuGong
  • Medium Wheel Loaders
  • 848H
  • Medium
  • Model: QSB6.7
  • Tier 4 Final / Stage IV
  • Cummins
  • Gross power: 1175 hp (129 kW) @ 2,100 rpm| Net power: 167 hp (123 kW) @ 2,100 rpm
  • Peak torque: 620 lb-ft (841 N-m) @ 1,400 rpm
  • 409 in3 (6.7 L)
  • 6
  • Turbocharged & air-to-air intercooled
  • Type: Countershaft, power shift | Torque converter: Single stage, three elements | Numbres of speed, fwd: 4 | Numbres of speed, rev: 3
  • configuration: Articulated | pressure: 2,611 psi (18 MPa)
  • Limited slip
  • Limited slip
  • Service type: Wet discs, two independent circuits | Service actuation: Hydraulic
  • Type: Manual electronic control | actuation: Hydraulic
  • 20.5R25 L3 tire
  • 20.5R25 L3 tire
  • Heating capacity: 5.8 kW (7.8 hp) | Air conditioning: 6.0 kW (8.0 hp) | Hydrualic Raise: 5.5 s / Dump time: 1.6 s / Float down time: 3.0 s / Total cycle time: 10.1 s | Bucket breakout force: 26,977 lbf (120.0 kN)
  • Maximum travel speed, fwd: 27.5 mph (44.3 km/h) | Maximum travel speed, rev: 15.7 mph (25.3 km/h)
  • type: Piston
  • System pressure: 3,002 psi (20.7 MPa)
  • Axle oscillation: ±12° | Bucket rollback at ground level 45° | Bucket rollback at carry: 48° | Wheel thread: 10 ft 10 in (3,310 mm) | Turn angle, either side: 38° | Rear angle of departure: 28°
  • Cab: 10 ft 10 in (3,310 mm) | Maximum dump angle at full: 45° | Maximum hinge pin: 12 ft 11 in (3,935 mm) | Dump clearance at full discharge: 9 ft 0 in (2,750 mm) | Dump reach at full discharge: 3 ft 5 in (1,050 mm) | Maximum hinge pin: 3,720 mm (12 ft 2 in) | Bucket rollback at maximun: 60°
  • with bucket down: 26 ft 4 in (8,030 mm)
  • over tires: 8 ft 4 in (2,548 mm) | over bucket: 9 ft 1 in (2,750 mm)
  • 10 ft 0 in (3,050 mm)
  • 1 ft 3 in (366 mm)
  • outside of tire: 18 ft 4 in (5,590 mm) | bucket carry: 20 ft 6 in (6,520 mm)
  • digging , bucket level: 3 in (70 mm)
  • Tipping - straight 23,876 lb (10,830 kg) | Tipping - full turn 21,418 lb (9,715 kg)
  • Axles, each: 39.5 gal (36 L) | Bucket: 3.5 yd3 (2.7 m3)
  • 65.0 gal (245 L)
  • Engine: 4.5 gal (17 L)
  • 12.0 gal (44 L)
  • System: 48.0 gal (180 L)
  • 10.5 gal (40 L)
  • DEF tank: 5.0 gal (19 L)
  • 35,260 lb (15,994 kg)
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • Homosassa, Florida
  • New
  • INBOUND
  • 2021
  • LiuGong
  • Medium Wheel Loaders 848H
  • PERKINS
  • Type: Countershaft, power shift | Torque converter: Single stage, three elements | Numbres of speed, fwd: 4 | Numbres of speed, rev: 3
  • Diesel
  • Available
  • over tires: 8 ft 4 in (2,548 mm) | over bucket: 9 ft 1 in (2,750 mm)
  • Cab: 10 ft 10 in (3,310 mm) | Maximum dump angle at full: 45° | Maximum hinge pin: 12 ft 11 in (3,935 mm) | Dump clearance at full discharge: 9 ft 0 in (2,750 mm) | Dump reach at full discharge: 3 ft 5 in (1,050 mm) | Maximum hinge pin: 3,720 mm (12 ft 2 in) | Bucket rollback at maximun: 60°

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.